Pico328, a tiny expandable Atmega328 board with many options that you can choose.Designed by Phoenix CNC, OLEDiUNO, Ships from Bulgaria
Most innovated custom PCB with too many features to list. OLEDiESP version with microSD card support out now.
What is it? A tiny Atmeage 328 PCB with expandable options Why did you make it? Because I just like to design tiny PCB's to push function, form and usability. What makes it special? Because there i...Read More…
A tiny Atmeage 328 PCB with expandable options
Because I just like to design tiny PCB's to push function, form and usability.
Because there is nothing on the market that can compare to it and it's functions and options. The base PCB has the Atmega328P-AU chip on it, the caps, resitors, 16MHz crystal and a blue LED connected to pin D13.
You can easily upload code by using a USB adapter with the Arduino IDE by selecting the Arduino UNO as board.
The PCB is designed so a I2C OLED display can be connected directly to it. The 0.66" OLED that is was design for has 64x48 pixels. A side emitting Neopixel can be selected as a option. You can also get the PicoRTC module and thus turn it into a Neopixel or OLED display clock. A navigation switch can be used too.
The PCB has the I2C pins available to expand it with any module or sensor. Additionally A0 and D2 pins along the RX and TX including reset pin are usable to upload code and to connect the tiny GPS module for example.
If you have any additional question please feel free to ask me via message. Thank you for your interest.
The size of the PCB is 18x18 mm.
|Shipping Rate||First item||Additional items|
Bulgarian Post: Standard Air Rate
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!
I build the best Atmega328 based micro OLEDiUNO PCB that enables you to connect a I2C OLED display directly to the PCB. Plus the OLEDiUNO now OLEDiMAX PCB features an on board navigation switch, slide switch integrated Lipo charging circuit, micro USB port and 4 SMD LED's in each corner.
New product is out. It is the OLEDiESP with microSD card support, please see my listing for more info.
Also build the best Grbl based CNC Controller with PWM output, spindle enable and coolant outputs among other features not found on any Arduino shields.