Acrylic case for Nextion 2.4 2.8 3.2 case for Raspberry Pi or own electronicsDesigned by PanCalculus in United Kingdom
For assembly instructions please click on the Documentation link below Note at the moment the instructions are for 2.8tft but there is no difference in the case assembly apart from the fact that th...Read More…
Note at the moment the instructions are for 2.8tft but there is no difference in the case assembly apart from the fact that the nextion display does not require any spacers.
This is a case or enclosure for the popular Nextion displays the sizes available are 2.4 and 2.8 inches. Also the case has cuto0ts for a Rasperry Pi 2/3 model B or Pi 1 Model B+. The cutout size is designed for each display and the 3.0mm diameter holes are aligned for this display. The Raspberry pie bolts to the bottom plate of the enclosure it is mounted on 5mm spacers which allows room for air circulation, there are also ventilation holes cut in the bottom plus a gap between the back plate and the top to allow air to escape.
The enclosure is supplied flat and you assemble it your self, it is designed to stay together with friction interference fit, however small amounts of cynoacrylate can be used for a very strong joint. If you want to see how it is assembled look at the instructions from the link below.
Not if any of the cynoacrylate (super glue) gets where you don't want it wipe it away so it is as this thin as possible, then you can use a nail varnish removing wipe to remove the residue leaving the perspex with a lovely shine.
Any questions let us know and of course if you want to put you own scratch built PCB in leave a note with the order and it can be supplied without cutouts.
4x M3x8mm bolts for the LCD 4x M2.5 BZP nuts
2x M3x12mm Stainless Bolts for the sliding catch. 1x Sliding Latch 2x M3 Nylock nuts 2x M3 Washers
4x M2.5x12mm BZP Bolts for the Raspberry pie 4x5mm Spacers to support the PCB properly 4x M2.5 BZP Nuts
4x Clear Soft Self Adhesive Plastic Feet
8 Perspex enclosure panels
Note Does Not Include the display or the Raspberry Pi or any cables
Note at the moment these are for 2.8tft but there is no difference in the case assembly apart from the fact that the nextion display does not require any spacers.
Please Leave feedback if you do we will leave feedback in return.
Copyright Hobby Parts and Supplies 2015 2016
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!