96 well RGB light panel power board for connecting Neopixels to 5V microcontrollersDesigned by Maplebear Electronics, Ships from United States of America
The light panel power board is intended for use with the 96 well microplate RGB LED light panel although any Neopixel-based par should work. The power board allows Neopixel-based LEDs to be easily ...Read More…
The light panel power board is intended for use with the 96 well microplate RGB LED light panel although any Neopixel-based par should work. The power board allows Neopixel-based LEDs to be easily connected to 5V power source and 5V microcontroller for rapid development. The power board consists of a barrel jack connector for 5V power supply, a 1000uF capacitor and 300 Ohm resistor between the data connection pins as recommended in the Adafruit Neopixel best practices guide. This product includes a 5V 2.1A AC/DC adapter (Digikey part # 364-1265-ND).
NOTE: Please be aware that at full intensity with all LEDs turned fully on for white light the 96-well light panel will draw approximately 3 amps of current. In the same scenario the 384-well light panel will draw 6.24 amps of current. It is not recommended to run the light panels at full white light intensity for extended periods of time without an appropriately sized power supply and sufficient cooling. Most bench-top lab applications will have sufficient LED brightness at 50% intensity or less.
|Shipping Rate||First item||Additional items|
Pickup in person: Local pickup (Palm Beach, Florida)
United States Postal Service: Standard Ground Rate
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!