TritiLED These tiny lights shine clearly in the dark, glowing for approximately two and a half years on a single CR2032 battery. There are three operating modes, selectable with the pushbutton: a ...Read More…
These tiny lights shine clearly in the dark, glowing for approximately two and a half years on a single CR2032 battery.
There are three operating modes, selectable with the pushbutton: a continuously on mode, a fast blink, and a slow blink. They all use nearly the same power; with the blinking modes concentrating the energy into a brighter flash.
Tritium lights are cool. This is a known fact. However, they are expensive, potentially hazardous, and not suitable for a lot of applications. That's where the TritiLED comes into play; it's relatively low cost, safe (as long as you don't eat the battery) and easily attached to anywhere you need a permanent light with a magnet or some double sided foam-tape. I have them around my apartment marking off the corners of tables so I suffer less late-night bumps.
This entire project was built with efficiency as its main objective. The LED is chosen for ideal visual registration in low light, and the 60Hz pulse circuitry is configured to provide a regulated pulse that uses a minimum amount of power without any visible flickering.
The circuit is essentially a single shot boost regulator, being driven by a microcontroller to pulse at a specified rate. The driver MOSFET is opened for a single cycle before being released, resulting in a brief flow of current through the inductor, which stores energy. Once the MOSFET is closed the voltage across the inductor spikes, activating the LED and releasing the stored energy as light with very little electrical loss.
|Shipping Rate||Ships From||First item||Additional items|
United States Postal Service: First Class Parcel (2-5 days)
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!