MightyWatt R3 is a programmable electronic load made as an Arduino shieldDesigned by Kaktus, Ships from Czechia
MightyWatt revision 3 turns your Arduino Uno R3 or Arduino Zero (M0/M0 Pro) into an electronic load capable of dissipating 70 Watts in a very small form factor. Ideal for testing power supplies, ba...Read More…
MightyWatt revision 3 turns your Arduino Uno R3 or Arduino Zero (M0/M0 Pro) into an electronic load capable of dissipating 70 Watts in a very small form factor. Ideal for testing power supplies, batteries, solar cells, fuel cells or power amplifiers. MightyWatt R3 has a research-grade electronics and is aimed not only at hobbyists but also at professionals.
Ready to go
MightyWatt R3 comes fully assembled and calibrated. You will thus get everything you need except the Arduino. The calibration is independent on Arduino board.
How does it work
MightyWatt R3 uses a special FET in a linear mode to act as a variable resistor. User values are set via DAC that is controlled by Arduino. Current and voltage are measured using a built-in delta-sigma ADC and the load can switch between a constant-current or constant-voltage mode in hardware. In addition, constant-power and constant-resistance can be maintained via a software control loop.
Firmware, as an Arduino sketch, is provided. A Windows software (written in C#) is also available so you can control everything with a few mouse clicks. Everything is open-hardware and open-source and I am open to your questions :-)
Specifications and highlights
Optional test cables:
Firmware and software
MightyWatt R3 uses an Arduino sketch as its firmware. There is also a second sketch for calibration if you wish to recalibrate your unit manually. Windows software uses the virtual serial port of Arduino to send commands and receive data from the load. It can set constant current, voltage, power and resistance. Monitor temperature, log data and create scripts that include constant values, ramps and the control of unused Arduino pins. It also has a watchdog to disconnect the load in case value drops below or rises above a user-set threshold. You can switch between 2-terminal and 4-terminal measurement. The software features real-time statistics and you can display graphs using the built-in support for gnuplot. All the firmware and software is open-source and fully-functional right away but you are more than welcome to tinker with it!
|Shipping Rate||First item||Additional items|
Czech Post: International Registered Mail (with tracking)
Paul | Feb. 18, 2019
Alex | Feb. 15, 2018
Dave | Jan. 13, 2018
Dario | Oct. 27, 2017
Thomas | March 19, 2016
Michael | Jan. 8, 2016
Dominik | Oct. 25, 2015
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!
I am 32-year old and have a PhD in inorganic technology (specialized in electrochemistry). I create hardware that is often inspired by electrolysis and fuel cell research.