September SALE SUPER LOW PRICE !
We are slashing the price for this product ! on September sale Grab one now while stocks lasts
Comes Assembled and ready to use !
I did not find a suitable product to keep the temperature right to fuse two filaments together , so i made my own
None are available on the net .. so i did it !
The filament fuser can be controlled by setting the desired temperature with a control Knob, the controller will take care to reach and keep that temperature, As a safety feature the controller can be switched off when the temperature is set less than 10. Other safety features detection of sensor . if sensor is not connected the controller halts itself.
Uses common 12v 3D printer heater - and aluminium block .. Uses common 100k NTC sensor Thermistor Temperatures are displayed on lcd .. PID control of temperatures ..
Now with PID auto tune mode / Normal / Aggressive modes
Set point control pot range from 0 to 300 degrees Heater control via PID ..
Set point range 0 - 10 : Switches Heater off ... Sensor detect : shuts off the heater if sensor temp is not detected. In line - Poly Fuse Pre warm-up delay to allow sensor to settle Intro Message to alert user to use a fan on hotend. 10 second delay countdown.
Supplied ready built and tested -
Enclosure available - please ask for a price quote due to shipping costs ..
|Shipping Rate||First item||Additional items|
Maltapost: Standard Ground Rate
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!
Jason Kits is committed to provide you with quality and state of the art products .