CP2102N 3.3v Serial Adapter With POGO Pins And All Pins Broken OutDesigned by HiboTronix, Ships from United Kingdom
0.1" Headers Not Included Or Soldered For Flexibility Parts Included 1x Fully Assembled And Tested USB Serial Adapter 6x POGO Pins What is it? USB To Serial Adaptor (6 Pin FTDI Footprint Compatib...Read More…
0.1" Headers Not Included Or Soldered For Flexibility
USB To Serial Adaptor (6 Pin FTDI Footprint Compatible) With USB Mini B Connector.
The Board Has ESD Protection Diodes On Vusb, D+ & D- And Unpopulated 0805 Pads For An ESD Suppression Network Tied To The USB Connector Shield (C5/R4). These Are Only Useful If You Put The Adapter In An Enclosure.
If You Need The USB Shield Grounded You Can Bridge C5 And R4 With Solder.
There Is A 3mm Hole To Attach A Keyring Or Lanyard.
Approximately 49mm x 23mm
I Have Had Bad Luck With The Handfull Of FTDI/CH340 Boards I Have Bought Over The Years. I Just Wanted Something That Works!
True 3.3v Operation*, Pogo Pins And Footprint For Normal/Right-Angle Headers.
*I Have Had An FTDI 5v/3.3v Device That In 3.3v Mode Puts 3.3v Out On The Power Pin But 5v On TX!!
Drivers For Android, Windows, MacOSX & Linux Here!
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!