Shipping to United States starts at $4.50
Note: Shipping may take a few days longer than usual due to the holidays.
The CAN32 development board is designed to allow easy projects and testing of the ESP32 in a CAN-BUS environment. This board has many features that will get you started without the need for external breakouts.
One of the main requirements for this dev board was a high-quality PCB (gold coated pads) and brand-name parts. Broken-out pins can be used for adding various other modules and sensors. The 800mA LDO can provide over 500mA @3.3V to external devices. GPIOs/power broken out:
Four larger vias allow connection of CAN H and L, 12V (max. 15V), GND. The board can be powered via USB or vehicle battery 12V (max. 15V), but 12V is not required if powered via USB.
Four LEDs signal power to board (red), ESP on (blue), USB->UART RX (orange), USB->UART TX (green)
The ESP32 CAN-BUS protocol is still under development (as are most features), but there are working examples available (https://github.com/ThomasBarth/ESP32-CAN-Driver). Each board is tested, CP2102 pre-configured, and an Arduino Wifi-Scan example is pre-programmed.
Chase | Jan. 13, 2018
|Shipping Rate||First item||Additional items|
Czech Post: Priority AirMail
Shipping usually takes 5-7 work days. Please use the Tracking Number provided upon shipping and enter it into your national post office's online tracking. The tracking number will usually be registered in the destination country's postal search 3-5 days after departure.
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!