Shipping to United States starts at $6.50
A very useful device not only for makers.
The four lines 5V,GND,D+,D- can be individually switched ON or OFF (connected or disconnected).
Look at the pictures, it's pretty self-explanatory...
Charging (or power supplying) a device (e.g. your mobile / mp3-player / camera) with an "unknown" PC or the PC in your office/company/at your employer.
You don't know if this PC "scans" all your private and confidential data,
you don't know if this PC is "infected" with some virus or malware !
Simply switch off the 2 data-lines (D+ and D-) on the USB-Helper and you are protected.
Sometimes you want to communicate with a device but without connecting the 5V from the PC.
(quite often the 5V-supply from a PC is very noisy, with voltage spikes or some humming occurs...)
-- communicating with a microcontroller system that has it's own power supply (3.3V / or own 5V-System)
-- using USB audio systems (e.g. external D/A-converter) with own power supply without "injecting" noises and humming from the PC.
Simply switch off the 5V-line on the USB-Helper and you are ready to go.
(in some scenarios even the GND switch can be disconnected as well, you have to try)
you will get a kit which consists of the following parts (see pictures):
*(this enclosure has been designed and manufactured by
Garrett Bartley [Wgb.Me] --> https://www.tindie.com/stores/wgbartley)
This is open source hardware in terms of the definitions of oshwa.org
|Shipping Rate||First item||Additional items|
Deutsche Post: registered mail (big)
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!
One-man hobbyist* maker shop with a focus on value-added PCB-based products,
useful as tools helping other makers, like breakout boards, shields, small microprocessor boards (mostly ATMEL), and more stuff ...
*(I am/have not a company/business)
The bare PCB itself is made in Europe, the assembling (SMT / reflow) is done by myself.
Most of my products are open source hardware (according to -> http://oshwa.org).
PCB development is done with EAGLE (-> https://cadsoft.io).