"DM dispenser" is a solder paste and adhesive dispenser. Completely original design from the electronics to the mechanical parts, case and software, everything was engineered from the ground up to give you the most simple and yet flexible dispensing solution. Great little tool if you're getting into SMD prototyping and assembly.
It is the world's first and only USB powered dispenser that also works as a vacuum pick up tool! Watch the introduction video below.
Easy to use: refill in under 2 minutes with no mess, swap between syringes in just seconds and store your leftover paste or adhesive in the same syringe.
Power via USB port or DC connector, no compressor needed.
3 Dispensing modes: Manual, Timer and Dot.
Pick up mode! using a second empty syringe (included) you can pick up SMD components straight from the tape for faster and easier board assembly.
Compatible with external switches.
Optically isolated input for connecting with external devices like 3D printers and CNCs.
Syringes and tips can be reused multiple times, you just need to clean them before refilling.
Dispenser can be powered with a standard 5Vdc 5.5/2.1mm center positive cable or if you prefer convenience of the USB port you can also use it.
All orders now ship with a syringe adapter which allows you to fill dispensing syringes from the bottom, minimizing chances of air getting trapped inside. Useful for solder pastes and similar high viscosity fluids.
If you bought a DM dispenser in the past two months you can also get this adapter, simply send me a message with your original order number and I'll ship you one for free.
2 empty syringes with caps and pistons 15cc aprox. effective volume each.
12 tips of the following sizes:
2x tapered 18ga
2x tapered 20ga
2x tapered 22ga
1x straight stainless steel 14ga
1x 45deg stainless steel 14ga
2x straight stainless steel 20ga
2x straight stainless steel 22ga
1x Coupler for easy fluid transfer between syringes.
1x Rubber tip for picking up large ICs.
For more information visit the website: dmdispenser.wordpress.com
Note1: For best results use the lowest viscosity paste you can get, solder pastes that come in prefilled syringes are more likely to work right away than the ones sold in jars, for those you can add liquid flux and it will reduce the viscosity.
Note2: You can contact me if you want an alternate shipping option not shown during checkout.
Note3: In some regions a lower contents value is declared to reduce import duties, contact me prior to ordering or immediately after if you need a specific amount in your case. Tracking number is always provided but it may not work in some countries.
|Shipping Rate||First item||Additional items|
United States Postal Service: Registered mail
Estimated shipping time: 2 to 3 weeks. Delivered via USPS.
United States Postal Service: Priority mail
Estimated shipping time: 1 to 2 weeks. Delivered via USPS, signature required.
DHL: Express Worldwide
Estimated shipping time: 3 to 5 days.
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!
DM dispenser was created from a need to dispense cheaply and easily pastes and adhesives. Most dispensers on the market are aimed squarely for industrial use and are not very user friendly.
In this case I designed it to have the same (and even more) functionality as those, but also made an effort to make it as simple and frustration free as possible for every day use.