Tindie

Name: 115x90mm IP66 Project Box Solderable Breadboard
SKU: 16612
Price: 11.99 USD
Availability: InStock

115x90mm IP66 Project Box Solderable Breadboard

The SuperPerf 115x90mm Project Box Perf Board Kit is perfect for those projects that you need to put in a larger, water/dust resistant box.

Designed by CircuitSetup in United States of America

115x90mm IP66 Project Box Solderable Breadboard 1

115x90mm IP66 Project Box Solderable Breadboard 2

115x90mm IP66 Project Box Solderable Breadboard 3

115x90mm IP66 Project Box Solderable Breadboard 4

115x90mm IP66 Project Box Solderable Breadboard 5

115x90mm IP66 Project Box Solderable Breadboard 6

115x90mm IP66 Project Box Solderable Breadboard 7

2019-04-02T19:36:29.920Z-20190321_112130.jpg

2019-04-02T19:36:29.920Z-20190321_112048.jpg

2019-04-02T19:36:29.920Z-20190321_112102.jpg

2019-04-02T19:36:29.920Z-20190321_112028.jpg

2019-04-02T19:36:29.920Z-51LZ-evS1ML._SL1100_.jpg

2019-04-02T19:36:29.920Z-51Z-AXr757L._SL1100_.jpg

The SuperPerf 115x90mm Project Box Perf Board Kit is perfect for those projects that you need to put in a larger, water/dust resistant box.

What is it? The SuperPerf 115x90mm Project Box Solderable Breadboard Kit is perfect for those projects that you need to put in a larger, water/dust resistant box. What makes it special? PCB Feature...

What is it?

The SuperPerf 115x90mm Project Box Solderable Breadboard Kit is perfect for those projects that you need to put in a larger, water/dust resistant box.

What makes it special?

PCB Features:

Each through-hole can be connected (soldered) to perpendicular traces on either side of the board to connect any other hole within that section of the board
Footprints for 5.08mm screw connectors (2 hole x5, 3 hole x1)
2 front connectors are connected to power rail traces (holes are not connected by default)
4 rear connectors are connected to traces running next to power rails
Footprint for DC power jack – connected to center power rail
Standard 2.54mm spacing
108×83mm

Box Features:

Outside dimensions: 115x90x56mm
Inside dimensions: 108x83x53mm
IP66 dust and water resistant
Comes with 4 screws for lid & 4 screws for PCB

NOTE: The trace for the outer hole GND tie (next to the 3 hole screw connector) is incorrectly routed to the positive terminal instead of the negative on this batch of these boards. This will only affect your project if you were to tie this hole to ground, which is not done by default.