This board provides all the debounce and mounting holes to easily use a rotary encoder in your next projectDesigned by lubenwerks, Ships from United States
See the improved version here: Improved mountable rotary encoder breakout More stock coming the week of April 19, 2018. This is an easy to use board that provides mounting of a rotary encoder and t...Read More…
See the improved version here: Improved mountable rotary encoder breakout
More stock coming the week of April 19, 2018.
This is an easy to use board that provides mounting of a rotary encoder and the debounce components for both the encoder portion and an [optional] switch.
I've always been frustrated with how hard it is to pick up a rotary encoder and just use it, either on a breadboard or in a final project. Rotary encoders just don't fit on a breadboard very well. To debounce it correctly for use with an Arduino or Teensy, one needs two capacitors and two resistors. In addition, many of the cheaper rotary encoders do not come with threads, leaving the builder to support it on a pcb (if you are lucky enough to fabricate one).
I designed this reusable module that works great on a both a breadboard and in a final project box. This module has two holes to mount the board on stands on a chassis. If you are using a rotary encoder that is threaded, then ignore the holes! There is a five pin header (2.54mm) that mounts easily on a breadboard; or solder wires directly to the board.
The A and B rotary encoder output can be directly used with and Arduino or Teensy. This module is 3v and 5v compatible.
What's included: You will receive one pcb with all surface mount components solderd on the board You will receive one 1x5 pin header ** Rotary encoder shown in picture is not included
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!
I build modules because they are useful. Assembled in the Portland, OR (specifically the garage).
Midnight makers and engineers don't always have a lot of time; the modules save you time.
Visit me at http://www.lubenwerks.io/