FTDI 3.3v UART to USB AdapterDesigned by 8086 Consultancy, Ships from United Kingdom
USB Serial Adaptor Plugs directly onto our Cluster HAT and MMC (SD) HAT to provide serial console access to the Raspberry Pi for quick access. Using jumper wires it can be used to access the serial...Read More…
USB Serial Adaptor
Plugs directly onto our Cluster HAT and MMC (SD) HAT to provide serial console access to the Raspberry Pi for quick access.
Using jumper wires it can be used to access the serial on a Raspberry Pi and for Arduino programming (using RTS for reset).
We use through hole connections on both micro USB and female 6 way 0.1" header for a more robust product over the surface mount alone.
|RTS||Request to send|
|RX||Receive (connect to remote TX)|
|TX||Transmit (connect to remote RX)|
|3V||3.3V supply (50mA max)|
|CTS||Clear to send|
This board can only be used with systems using 3.3 volts, connecting to those using higher/lower voltages may result in damage.
To enable serial console on a default Raspbian (or Cluster HAT) installation add "enable_uart=1" to your config.txt in the boot partition.
An FTDI FT234X IC is used in the adapter. "Virtual COM port (VCP)" drivers are available on ftdichip for many operating systems, the required kernel module is automatically loaded on recent Linux installations.
|Shipping Rate||First item||Additional items|
Royal Mail: International Economy Large Letter 100g
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!
Maker of things mostly for the Raspberry Pi and Arduino world.