3.3v UART CDC USB-C adapter with 3-pin SH connector.Designed by 8086 Consultancy in United Kingdom
USB-C CDC Serial Adaptor with 3-pin SH connector and 10cm cable (compatible with 1mm pitch JST SH). The supplied 10 cm cable plugs directly into the dedicated UART port on the Raspberry Pi 5 providin…Read More…
USB-C CDC Serial Adaptor with 3-pin SH connector and 10cm cable (compatible with 1mm pitch JST SH).
The supplied 10 cm cable plugs directly into the dedicated UART port on the Raspberry Pi 5 providing quick serial console access. 3-pin cables for the Raspberry Pi Debug Probe can also be used, or additional longer cables can be added to your order as an option.
If additional/longer cables are required please see our 3-pin SH Cables product where you can order the length required.
|TX||Transmit (connect to remote RX)|
|RX||Receive (connect to remote TX)|
When using with a Raspberry Pi 5 in an official case the cable can exit in the gap at the side of the Ethernet port.
The following baud rates are supported
|Baud rate||Miss rate (%)|
This board can only be used with systems using 3.3 volts, connecting to those using higher/lower voltages may result in damage.
The Serial console is enabled by default on Raspberry Pi OS (Bookworm) elsewhere it can normally be enabled by adding "enable_uart=1" to the config.txt file in the boot partition.
The IC is used in the adapter enumerates as a Communication Device Class (CDC) device which modern (Win10/Linux/Mac OS X) operating systems have built in drivers for.
No country selected, please select your country to see shipping options.
No rates are available for shipping to .
Enter your email address if you'd like to be notified when USB-C CDC Serial SH can be shipped to you:
Thanks! We'll let you know when the seller adds shipping rates for your country.
|Shipping Rate||Tracked||Ships From||First Item||Additional Items|
Please be aware mail to some destinations are delayed and may take up to 3 weeks in some cases.
Please ensure your address is full and correct before placing an order. I'm unable to ship to PO boxes.
Due to the 1st July 2021 EU VAT changes and limitations to the Tindie system I'm currently not shipping to the EU. If you're in the EU and want to purchase my products I'd advise searching for either global or local resellers.
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!