ecPower. Power supply adaptor with microusb connector to fit into a breadboardDesigned by elecrab, Ships from Spain
Board documentation and tutorials. Description: ecPower provides an interface to receive any micro USB charger used in conventional devices (phone, tablet, etc) to source the power in the breadboar...Read More…
ecPower provides an interface to receive any micro USB charger used in conventional devices (phone, tablet, etc) to source the power in the breadboard. The board offer the option of either selecting a voltage output of 3.3 Vdc from its internal linear regulator or 5Vdc direct from the USB.
It has two rows of pins to provide a secure fit to the breadboard, pin V+ is the positive output voltage, 5 or 3.3 Vdc, which gets selected by a jumper. G- is the ground reference or 0 Vdc.
The linear regulator is rated for 3.3 Vdc and it has a built in over current and over temperature protection providing up to 0.8 A. The PCB acts as its own heatsink, given its nature of linear dissipative regulator there are zones where the temperature could reach 90-95 ºC if the drawn current gets closed to its limit.
If 5 Vdc is chosen, ecPower could source up to 0.5 A, this limit is imposed by a resettable fuse (PTC: Ihold = 0.5A Itrip = 1A).
The connector pins USB D+ and D- are not used, that way the ecPower becomes compatible with any generic charger as our tests have confirmed.
Requires some easy soldering with through hole parts.
|Shipping Rate||First item||Additional items|
Correos: Standard Ground Rate
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!